; 20 Note John Smith Busker Organ Roll ; ; Gamma file for Noteur editing software and MIDIBoek printing software ; prepared by Wallace Venable - wallace.venable@mail.wvu.edu - Last revised 7 January 2008 ; This file has been saved with a .TXT extension for easy reading and transmission. To use this file, ; change its name to "Smith-20.gam" ; ; The Smith Busker scale is the standard "Carl Frei 20er" 20-note crank-organ scale ; Layout uses a 140 mm wide roll with 4 mm holes ; Dimensions in Gamma files are in 0.1 mm units ; ; The MIDIBoek and Noteur program command words are Dutch. TOETS means NOTE, and is ; followed by the MIDI Note Number ; ; Anything following a ";" is treated by the programs as a comment statement. ; TOETS 0053 ; (F) TOETS 0058 0 0030 ; (Bb) TOETS 0060 0 0030 ; (C - "Middle C") TOETS 0062 0 0030 ; (D) TOETS 0063 ; (Eb) TOETS 0064 ; (E) TOETS 0065 ; (F) TOETS 0067 ; (G) TOETS 0069 ; (A-440) TOETS 0070 ; (Bb) TOETS 0072 ; (C) TOETS 0074 ; (D) TOETS 0075 ; (Eb) TOETS 0076 ; (E) TOETS 0077 ; (F) TOETS 0079 ; (G) TOETS 0081 ; (A) TOETS 0082 ; (Bb) TOETS 0084 ; (C) TOETS 0086 ; (D) ; KLAVP 0020 ; Number of notes in scale - used as check value only SNELH 0500 ; Roll speed - This value works. Keep it low if hand-punching. ; It could be increased to 700 or so for computer punching TBRDT 0040 ; Note width on print LEIMA 0100 ; Guide-side margin ONDMA 0070 ; Off-side margin MINLE 0040 ; Minimum note length - should equal circle diameter HARTA 0060 ; Standard internote spacing NTYPE S ; Note-type = Standard. This prints rectangles, which are good guides for hand-punching. ; ; Full explanation of Gamma files will be found in the MIDIBoek and Noteur documentation. ; You can download the Midiboek for Windows software and Noteur (both are free) from ; http://huizen.daxis.nl/~Ppaardekam/